Center for Quantum Devices - Most Downloaded Journal Articles

Page 28 of 30: Prev << 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 >> Next (732 Items)

6.	Advances in antimonide-based Type-II superlattices for infrared detection and imaging at center for quantum devices M. Razeghi, A. Haddadi, A.M. Hoang, E.K. Huang, G. Chen, S. Bogdanov, S.R. Darvish, F. Callewaert, R. McClintock Infrared Physics & Technology, Volume 59, Pages 41-52 (2013)-- July 1, 2013 ...[Visit Journal] Type-II InAs/GaSb superlattices (T2SLs), a system of multi-interacting quantum wells, was introduced by Nobel Laureate L. Esaki in the 1970s. Since then, this material system has drawn a lot of attention especially for infrared detection. In recent years, T2SL material system has experienced incredible improvements in material quality, device structure designs and device fabrication process which elevated the performances of T2SL-based photo-detectors to a comparable level to the state-of-the-art material systems for infrared detection such as Mercury Cadmium Telluride (MCT). In this paper, we will present the current status of T2SL-based photo-detectors and focal plane arrays for imaging in different infrared regions, from SWIR to VLWIR, and the future outlook of this material system. [reprint (PDF)]
6.	Planar nBn type-II superlattice mid-wavelength infrared photodetectors using zinc ion-implantation Arash Dehzangi, Donghai Wu, Ryan McClintock, Jiakai Li, and Manijeh Razeghi Appl. Phys. Lett. 116, 221103 https://doi.org/10.1063/5.0010273-- June 2, 2020 ...[Visit Journal] In this Letter, we report the demonstration of zinc ion-implantation to realize planar mid-wavelength infrared photodetectors based on type-II InAs/InAs1−xSbx superlattices. At 77 K, the photodetectors exhibit a peak responsivity of 0.68 A/W at 3.35 μm, corresponding to a quantum efficiency of 23.5% under Vb = −80 mV, without anti-reflection coating; these photodetectors have a 100% cutoff wavelength of 4.28 μm. With an R0 × A value of 1.53 × 104 Ω cm2 and a dark current density of 1.23 × 10−6 A/cm2 under an applied bias of −80 mV at 77 K, the photodetectors exhibit a specific detectivity of 9.12 × 1011 cm·Hz1/2/W. [reprint (PDF)]
6.	Temperature dependence of threshold current density J_th and differential efficiency of High Power InGaAsP/GaAs ( λ = 0.8 μm) lasers H. Yi, J. Diaz, I. Eliashevich, M. Stanton, M. Erdtmann, X. He, L. Wang, and M. Razeghi Applied Physics Letters 66 (3)-- January 16, 1995 ...[Visit Journal] An experimental and theoretical study on temperature dependence of the threshold current density J_th and differential efficiency ηd for the InGaAsP/GaAs laser diodes emitting at λ=0.8 μm was performed. Threshold current density J_th increases and differential efficiency η_d decreases as temperature is increased mainly because of thermal broadening of the gain spectrum. However, the measured temperature dependence of J_th and η_d could not be explained when only this effect was considered. In this letter, the temperature dependence of momentum relaxation rate ℏ/τ of carriers was investigated by performing the photoluminescence study. At high temperature, increase of the momentum relaxation rate ℏ/τ leads to reduction of the gain and mobility and increase of the optical loss, causing higher J_th and lower η_d as experimentally observed. The resulting theoretical model provides a good explanation for the mechanism of the increase of J_th and decrease of η_d. [reprint (PDF)]
6.	Thin film transistors with wurtzite ZnO channels grown on Si₃N₄/SiO₂/Si (111) substrates by pulsed laser deposition D.J. Rogers; V.E. Sandana; F. Hosseini Teherani; M. Razeghi Proc. SPIE 7603, Oxide-based Materials and Devices, 760318 (March 02, 2010)-- March 7, 2010 ...[Visit Journal] Thin Film Transistors (TFT) were made by growing ZnO on Si₃N₄/SiO₂/Si (111) substrates by pulsed laser deposition. X-ray diffraction and scanning electron microscope studies revealed the ZnO to have a polycrystalline wurtzite structure with a smooth surface, good crystallographic quality and a strong preferential c-axis orientation. Transmission studies in similar ZnO layers on glass substrates showed high transmission over the whole visible spectrum. Electrical measurements of a back gate geometry FET showed an enhancement-mode response with hard saturation, mA range Id and a V_ON ∼ 0V. When scaled down, such TFTs may be of interest for high frequency applications. [reprint (PDF)]
6.	Strain-Induced Metastable Phase Stabilization in Ga₂O₃ Thin Films Yaobin Xu, Ji-hyeon Park, Zhenpeng Yao, Christopher Wolverton, Manijeh Razeghi, Jinsong Wu, and Vinayak P. Dravid ACS Appl. Mater. Interfaces-- January 10, 2019 ...[Visit Journal] It is well known that metastable and transient structures in bulk can be stabilized in thin films via epitaxial strain (heteroepitaxy) and appropriate growth conditions that are often far from equilibrium. However, the mechanism of heteroepitaxy, particularly how the nominally unstable or metastable phase gets stabilized, remains largely unclear. This is especially intriguing for thin film Ga₂O₃, where multiple crystal phases may exist under varied growth conditions with spatial and dimensional constraints. Herein, the development and distribution of epitaxial strain at the Ga₂O₃/Al₂O₃ film-substrate interfaces is revealed down to the atomic resolution along different orientations, with an aberration-corrected scanning transmission electron microscope (STEM). Just a few layers of metastable α-Ga₂O₃ structure were found to accommodate the misfit strain in direct contact with the substrate. Following an epitaxial α-Ga₂O₃ structure of about couple unit cells, several layers (4~5) of transient phase appear as the intermediate structure to release the misfit strain. Subsequent to this transient crystal phase, the nominally unstable κ-Ga₂O₃ phase is stabilized as the major thin film phase form. We show that the epitaxial strain is gracefully accommodated by rearrangement of the oxygen polyhedra. When the structure is under large compressive strain, Ga3+ ions occupy only the oxygen octahedral sites to form a dense structure. With gradual release of the compressive strain, more and more Ga3+ ions occupy the oxygen tetrahedral sites, leading to volumetric expansion and the phase transformation. The structure of the transition phase is identified by high resolution electron microscopy (HREM) observation, complemented by the density functional theory (DFT) calculations. This study provides insights from the atomic scale and their implications for the design of functional thin film materials using epitaxial engineering.
6.	Well Resolved Room Temperature Photovoltage Spectra of GaAs-GaInP Quantum Wells and Superlattices Xiaoguang He and Manijeh Razeghi Applied Physics Letters 62 (6)-- February 8, 1993 ...[Visit Journal] We report the first well resolved room‐temperature photovoltage spectra due to the sublevel transitions in the GaInP‐GaAs superlattices and multiquantum wells grown by low pressure metalorganic chemical vapor deposition. Sharp well resolved peaks attributed to exciton absorption of the electron‐to‐light hole and electron‐to‐heavy hole have been observed at room temperature. This indicates that GaAs‐GaInP is a promising material for the application of the modulators, optical switches, and optical bistable divices. Satisfactory agreements between experimental measurements and theoretical results have been obtained. These results demonstrate that photovoltage spectroscopy is a simple, but very powerful tool to study quantum confinement structures. [reprint (PDF)]
6.	Gain and recombination dynamics in photodetectors made with quantum nanostructures: The quantum dot in a well and the quantum well B. Movaghar, S. Tsao, S. Abdollahi Pour, T. Yamanaka, and M. Razeghi Physical Review B, Vol. 78, No. 11-- September 15, 2008 ...[Visit Journal] We consider the problem of charge transport and recombination in semiconductor quantum well infrared photodetectors and quantum-dot-in-a-well infrared detectors. The photoexcited carrier relaxation is calculated using rigorous random-walk and diffusion methods, which take into account the finiteness of recombination cross sections, and if necessary the memory of the carrier generation point. In the present application, bias fields are high and it is sufficient to consider the drift limited regime. The photoconductive gain is discussed in a quantum-mechanical language, making it more transparent, especially with regard to understanding the bias and temperature dependence. Comparing experiment and theory, we can estimate the respective recombination times. The method developed here applies equally well to nanopillar structures, provided account is taken of changes in mobility and trapping. Finally, we also derive formulas for the photocurrent time decays, which in a clean system at high bias are sums of two exponentials. [reprint (PDF)]
6.	Interface roughness scattering in thin, undoped GaInP/GaAs quantum wells W. C. Mitchel, G.J. Brown, I. Lo, S. Elhamri, M. Aboujja, K. Ravindran, R.S. Newrock, M. Razeghi, and X. He Applied Physics Letters 65 (12)-- September 19, 1994 ...[Visit Journal] Electronic transport properties of very thin undoped GaInP/GaAs quantum wells have been measured by temperature dependent low field Hall effect and by Shubnikov–de Haas effect. Strong Shubnikov–de Haas oscillations were observed after increasing the electron concentration via the persistent photocurrent effect. Low temperature mobilities of up to 70 ,000 cm²/V· s at carrier concentrations of 6.5×10¹¹ cm⁻² were observed in a 20 Å quantum well. The results are compared with the theory of interface roughness scattering which indicates extremely smooth interfaces; however, discrepancies between experiment and theory are observed. [reprint (PDF)]
6.	Stable single mode terahertz semiconductor sources at room temperature M. Razeghi 2011 International Semiconductor Device Research Symposium, ISDRS [6135180] (2011).-- December 7, 2011 ...[Visit Journal] Terahertz (THz) range is an area of the electromagnetic spectra which has lots of applications but it suffers from the lack of simple working devices which can emit THz radiation, such as the high performance mid-infrared (mid-IR) quantum cascade lasers (QCLs) based on InP technology. The applications for the THz can be found in astronomy and space research, biology imaging, security, industrial inspection, etc. Unlike THz QCLs based on the fundamental oscillators, which are limited to cryogenic operations, semiconductor THz sources based on nonlinear effects of mid-IR QCLs do not suffer from operating temperature limitations, because mid-IR QCLs can operate well above room temperature. THz sources based on difference frequency generation (DFG) utilize nonlinear properties of asymmetric quantum structures, such as QCL structures. [reprint (PDF)]
6.	Effects of well width and growth temperature on optical and structural characteristics of AlN/GaN superlattices grown by metal-organic chemical vapor deposition C. Bayram, N. Pere-Laperne, and M. Razeghi Applied Physics Letters, Vol. 95, No. 20, p. 201906-1-- November 16, 2009 ...[Visit Journal] AlN/GaN superlattices (SLs) employing various well widths (from 1.5 to 7.0 nm) are grown by metal-organic chemical vapor deposition technique at various growth temperatures (Ts) (from 900 to 1035 °C). The photoluminescence (PL), x-ray diffraction, and intersubband (ISB) absorption characteristics of these SLs and their dependency on well width and growth temperature are investigated. Superlattices with thinner wells (grown at the same Ts) or grown at lower Ts (employing the same well width) are shown to demonstrate higher strain effects leading to a higher PL energy and ISB absorption energy. Simulations are employed to explain the experimental observations. ISB absorptions from 1.04 to 2.15 µm are demonstrated via controlling well width and growth temperature. [reprint (PDF)]
6.	Determination of of Band Gap Energy of Al_1-xIn_xN Grown by Metal Organic Chemical Vapor Deposition in the High Al Composition Regime K.S. Kim, A. Saxler, P. Kung, M. Razeghi, and K.Y. Lim Applied Physics Letters 71 (6)-- August 11, 1997 ...[Visit Journal] Ternary AlInN was grown by metal–organic chemical-vapor deposition in the high Al composition regime. The band-gap energy of AlInN ternary was measured by optical absorption spectroscopy at room temperature. The band-gap energy of Al_0.92In_0.08N is 5.26 eV. The potential application of AlInN as a barrier material for GaN is also discussed. [reprint (PDF)]
6.	III-nitride based avalanche photo detectors R. McClintock, E. Cicek, Z. Vashaei, C. Bayram, M. Razeghi and M. Ulmer Proceedings, Vol. 7780, p. 77801B, SPIE Optics and Photonics Symposium, Conference on Detectors and Imaging Devices: Infrared, Focal Plane and Single Photon, San Diego, CA -- August 4, 2010 ...[Visit Journal] Research into III-Nitride based avalanche photodiodes (APDs) is motivated by the need for high sensitivity ultraviolet (UV) detectors in numerous civilian and military applications. By designing III-Nitride photodetectors that utilize low-noise impact ionization high internal gain can be realized-GaN APDs operating in Geiger mode can achieve gains exceeding 1×10⁷. Thus with careful design, it becomes possible to count photons at the single photon level. In this paper we review the current state of the art in III-Nitride visible-blind APDs and discuss the critical design choices necessary to achieve high performance Geiger mode devices. Other major technical issues associated with the realization of visible-blind Geiger mode APDs are also discussed in detail and future prospects for improving upon the performance of these devices are outlined. The photon detection efficiency, dark count rate, and spectral response of or most recent Geiger-mode GaN APDs on free-standing GaN substrates are studied under low photon fluxes, with single photon detection capabilities being demonstrated. We also present our latest results regarding linear mode gain uniformity: the study of gain uniformity helps reveal the spatial origins of gain so that we can better understand the role of defects. [reprint (PDF)]
6.	Lateral epitaxial overgrowth of GaN films on sapphire and silicon substrates P. Kung, D. Walker, M. Hamilton, J. Diaz, and M. Razeghi Applied Physics Letters 74 (4)-- January 25, 1999 ...[Visit Journal] We report the lateral epitaxial overgrowth of GaN films on (00.1) Al₂O₃ and (111) Si substrates by metalorganic chemical vapor deposition. The lateral epitaxial overgrowth on Si substrates was possible after achieving quasi-monocrystalline GaN template films on (111) Si substrates. X-ray diffraction, photoluminescence, scanning electron microscopy, and atomic force microscopy were used to assess the quality of the lateral epitaxial overgrown films. Lateral growth rates more than five times as high as vertical growth rates were achieved for both lateral epitaxial overgrowths of GaN on sapphire and silicon substrates. [reprint (PDF)]
6.	Reliable High-Power Uncoated Al-free InGaAsP/GaAs Lasers for Cost-Sensitive Optical Communication and Processing Applications M. Razeghi SPIE Conference, Dallas, TX, -- November 4, 1997 ...[Visit Journal] Unlike InP-based systems for long-distance communication applications, GaAs-based optoelectronic systems mostly for local-area network, optical interconnection or optical computing are very cost-sensitive because often these optoelectronic devices constitute most of the cost for these applications and fewer users share the cost. Thus besides technical issues, the processing cost should be addressed in the selection of materials and fabrication methods. We discuss a number of major advantages of Al-free InGaAsP/GaAs lasers for these applications, such as not coating- requirement, low cost, high long-term reliability, high performance. We discuss recent preliminary results of Al- free lasers as a first step toward these optoelectronic applications. [reprint (PDF)]
6.	Surface leakage reduction in narrow band gap type-II antimonide-based superlattice photodiodes E.K. Huang, D. Hoffman, B.M. Nguyen, P.Y. Delaunay and M. Razeghi Applied Physics Letters, Vol. 94, No. 5, p. 053506-1-- February 2, 2009 ...[Visit Journal] Inductively coupled plasma (ICP) dry etching rendered structural and electrical enhancements on type-II antimonide-based superlattices compared to those delineated by electron cyclotron resonance (ECR) with a regenerative chemical wet etch. The surface resistivity of 4×10⁵ Ω·cm is evidence of the surface quality achieved with ICP etching and polyimide passivation. By only modifying the etching technique in the fabrication steps, the ICP-etched devices with a 9.3 µm cutoff wavelength revealed a diffusion-limited dark current density of 4.1×10⁻⁶ A/cm² and a maximum differential resistance at zero bias in excess of 5300 Ω·cm² at 77 K, which are an order of magnitude better in comparison to the ECR-etched devices. [reprint (PDF)]
5.	Light People: Professor Manijeh Razeghi Hui Wang, and Cun Yu Light Sci Appl 13, 164 ...[Visit Journal] Editorial The sense of light is the first sensation the human body develops. The importance of light is self-evident. However, we all know that the light we can see and perceive covers only a small section of the spectrum. Today, for Light People, we feature a researcher who is committed to exploring different spectral bands of light ranging from deep ultraviolet to terahertz waves and working on quantum semiconductor technology, Prof. Manijeh Razeghi of the Northwestern University in the United States. Known for her quick thinking and witty remarks, Prof. Razeghi is passionate about life and always kind to others. As a scientist, she does not limit her research to a single focus, instead, she works on the entire process from material selection, device design, processing, and manufacturing, all the way to product application. She has a strong passion for education, a commitment unwavered by fame or fortune. For her students, she is both a reliable source of knowledge and a motherly figure with a caring heart. She firmly believes that all things in nature can give her energy and inspiration. In science, she is a true “pioneer” in research and a “miner” of scientific discoveries. She advises young scientists to enjoy and love what they do, and turn their research into their hobby. As a female scientist, she calls on all women to realize their true value and potential. Next, let’s hear from Professor Manijeh Razeghi, a true star who radiates energy and light [reprint (PDF)]
5.	Very High Average Power at Room Temperature from λ ~ 5.9 μm Quantum Cascade Lasers J.S. Yu, S. Slivken, A. Evans, J. David and M. Razeghi Applied Physics Letters, 82 (20)-- May 19, 2003 ...[Visit Journal] We report a very high average output power at room temperature for quantum-cascade lasers emitting at λ ~ 5.9 µm. For high-reflectivity-coated 2-mm-long cavities, a low threshold current density of 1.7 kA/cm² was obtained at room temperature. From 300 to 400 K, the characteristic temperature (T0) was 198 K. A maximum average output power of 0.67 W was achieved. In addition, 0.56 W average output power was observed at a duty cycle of 56%. [reprint (PDF)]
5.	Study on the effects of minority carrier leakage in InAsSb/InPAsSb double heterostructure B. Lane, D. Wu, H.J. Yi, J. Diaz, A. Rybaltowski, S. Kim, M. Erdtmann, H. Jeon and M. Razeghi Applied Physics Letters 70 (11)-- April 17, 1997 ...[Visit Journal] InAs_xSb_1−x/InP_1−x−yAs_xSb_y double heterostructures have been grown on InAs substrates by metal-organic chemical vapor deposition. The minority carrier leakage to the cladding layers was studied with photoluminescence measurements on the InAsSb/InPAsSb double heterostructures. A carrier leakage model is used to extract parameters related to the leakage current (diffusion-coefficient and length) from experimental results. Using the obtained parameters, the temperature dependence of the threshold current density of InAsSb/InPAsSb double heterostructure lasers is predicted and compared with experimental results. [reprint (PDF)]
5.	Sharp/Tuneable UVC Selectivity and Extreme Solar Blindness in Nominally Undoped Ga2O3 MSM Photodetectors Grown by Pulsed Laser Deposition D. J. Rogers, A. Courtois, F. H. Teherani, V. E. Sandana, P. Bove, X. Arrateig, L. Damé, P. Maso, M. Meftah, W. El Huni, Y. Sama, H. Bouhnane, S. Gautier, A. Ougazzaden & M. Razeghi Proc. SPIE 11687 (2021) 116872D-1 ...[Visit Journal] Ga2O3layers were grown on c-sapphire substrates by pulsed laser deposition. Optical transmission spectra were coherent with a bandgap engineering from 4.9 to 6.2 eV controlled via the growth conditions. X-ray diffraction revealed that the films were mainly β-Ga2O3(monoclinic) with strong (-201) orientation. Metal-Semiconductor-Metal photodetectors based on gold/nickel Inter- Digitated-Transducer structures were fabricated by single-step negative photolithography. 240 nm peak response sensors gave over 2 orders-of-magnitude of separation between dark and light signal with state-of-the-art solar and visible rejection ratios ((I240 : I290) of > 3 x 105 and (I240 : I400) of > 2 x 106) and dark signals of <50 pA (at a bias of -5V). Spectral responsivities showed an exceptionally narrow linewidth (16.5 nm) and peak values exhibited a slightly superlinear increase with applied bias up to a value of 6.5 A/W (i.e. a quantum efficiency of > 3000%) at 20V bias. [reprint (PDF)]
5.	Gain-length scaling in quantum dot/quantum well infrared photodetectors T. Yamanaka, B. Movaghar, S. Tsao, S. Kuboya, A. Myzaferi and M. Razeghi Applied Physics Letters, Vol. 95, No. 9-- August 31, 2009 ...[Visit Journal] The gain in quantum dot/quantum well infrared photodetectors is investigated. The scaling of the gain with device length has been analyzed, and the behavior agrees with the previously proposed model. We conclude that we understand the gain in the low bias region, but in the high field region, discrepancies remain. An extension of the gain model is presented to cover the very high electric field region. The high field data are compared to the extended model and discussed. [reprint (PDF)]
5.	Room Temperature Operation of InTlSb Infrared Photodetectors on GaAs J.D. Kim, E. Michel, S. Park, J. Xu, S. Javadpour and M. Razeghi Applied Physics Letters 69 (3)-- August 15, 1996 ...[Visit Journal] Long-wavelength InTlSb photodetectors operating at room temperature are reported. The photo- detectors were grown on (100) semi-insulating GaAs substrates by low-pressure metalorganic chemical vapor deposition. Photoresponse of InTlSb photodetectors is observed up to 11 µm at room temperature. The maximum responsivity of an In_0.96Tl_0.04Sb photodetector is about 6.64 V/W at 77 K, corresponding to a detectivity of about 7.64 × 10⁸ cm·Hz^½/W. The carrier lifetime in InTlSb photodetectors derived from the stationary photoconductivity is 10–50 ns at 77 K. [reprint (PDF)]
5.	Passivation of Type-II InAs/GaSb superlattice photodetectors A. Hood, Y. Wei, A. Gin, M. Razeghi, M. Tidrow, and V. Nathan SPIE Conference, Jose, CA, Vol. 5732, pp. 316-- January 22, 2005 ...[Visit Journal] Leakage currents limit the operation of high performance Type-II InAs/GaSb superlattice photodiode technology. Surface leakage current becomes a dominant limiting factor, especially at the scale of a focal plane array pixel (< 25 µm) and must be addressed. A reduction of the surface state density, unpinning the Fermi level at the surface, and appropriate termination of the semiconductor crystal are all aims of effective passivation. Recent work in the passivation of Type-II InAs\GaSb superlattice photodetectors with aqueous sulfur-based solutions has resulted in increased R₀A products and reduced dark current densities by reducing the surface trap density. Additionally, photoluminescence of similarly passivated Type-II InAs/GaSb superlattice and InAs GaSb bulk material will be discussed. [reprint (PDF)]
5.	Geiger-mode operation of back-illuminated GaN avalanche photodiodes J. L. Pau, R. McClintock, K. Minder, C. Bayram, P. Kung, M. Razeghi, E. Muñoz, and D. Silversmith Applied Physics Letters, Vol. 91, No. 04, p. 041104 -1-- July 23, 2007 ...[Visit Journal] We report the Geiger-mode operation of back-illuminated GaN avalanche photodiodes fabricated on transparent AlN templates specifically for back illumination in order to enhance hole-initiated multiplication. The spectral response in Geiger-mode operation was analyzed under low photon fluxes. Single photon detection capabilities were demonstrated in devices with areas ranging from 225 to 14,063 µm². Single photon detection efficiency of 20% and dark count rate < 10 kHz were achieved in the smallest devices. [reprint (PDF)]
5.	Widely tuned room temperature terahertz quantum cascade laser sources Q.Y. Lu, N. Bandyopadhyay, S. Slivken, Y. Bai and M. Razeghi SPIE Proceedings, Vol. 8631, p. 863108-1, Photonics West, San Francisco, CA-- February 3, 2013 ...[Visit Journal] Room temperature THz quantum cascade laser sources with a broad spectral coverage based on intracavity difference frequency generation are demonstrated. Two mid-infrared active cores in the longer mid-IR wavelength range (9-11 micron)based on the single-phonon resonance scheme are designed with a second-order difference frequency nonlinearity specially optimized for the high operating fields that correspond to the highest mid-infrared output powers. A Čerenkov phase-matching scheme along with integrated dual-period distributed feedback gratings are used for efficient THz extraction and spectral purification. Single mode emissions from 1.0 to 4.6 THz with a side-mode suppression ratio and output power up to 40 dB and 32 μW are obtained, respectively. [reprint (PDF)]
5.	Concentration gradient at an InP/GaAs interface determined by Auger analysis on a chemical bevel J. Cazaux; P. Etienne; M. Razeghi J. Cazaux, P. Etienne, M. Razeghi; Concentration gradient at an InP/GaAs interface determined by Auger analysis on a chemical bevel. J. Appl. Phys. 15 May 1986; 59 (10): 3598–3601-- June 15, 1986 ...[Visit Journal] Experimental results of Auger profiles obtained on a chemical bevel of an InP/GaAs structure are reported. A theoretical procedure is established to convert the intensity profile into concentration profiles. It is applied to evaluate the concentration distribution of each species–Ga, In, As, P–independently of each others with a precision of ±5%. It is verified that the composition of the interface is GaxIn1−xAsyP1−y (0≤x, y≤1). Owing to differences between the atomic diffusions of III‐ and V‐type elements, the transition region can be subdivided into three regions having the following compositions: (i) GaAsyP1−y with 0.87≤y≤1; (ii) GaxIn1−xAsyP1−y with 0≤y≤0.87 and 0.24≤x<1; (iii) PGaxIn1−x with x<0.24. The width of each region is also indicated. [reprint (PDF)]

Page 28 of 30: Prev << 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 >> Next (732 Items)