Center for Quantum Devices - Most Downloaded Journal Articles

Page 21 of 30: Prev << 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 >> Next (732 Items)

10.	Performance characteristics of high-purity mid-wave and long-wave infrared type-II InAs/GaSb superlattice infrared photodiodes A. Hood, M. Razeghi, V. Nathan and M.Z. Tidrow SPIE Conference, San Jose, CA, Vol. 6127, pp. 61270U-- January 23, 2006 ...[Visit Journal] The authors report on recent advances in the development of mid-, long-, and very long-wavelength infrared (MWIR, LWIR, and VLWIR) Type-II InAs/GaSb superlattice infrared photodiodes. The residual carrier background of binary Type-II InAs/GaSb superlattice photodiodes of cut-off wavelengths around 5 µm has been studied in the temperature range between 10 and 200 K. A four-point, capacitance-voltage technique on mid-wavelength and long-wavelength Type-II InAs/GaSb superlattice infrared photodiodes reveal residual background concentrations around 5×10¹⁴ cm^-3. Additionally, recent progress towards LWIR photodiodes for focal plane array imaging applications is presented. [reprint (PDF)]
10.	Two-dimensional magnetophonon resonance in GaInAs-InP and GaInAs-AlInAs heterojunctions and superlattices J.C. Portal, G. Gregoris a b , M.A. Brummell , R.J. Nicholas, M. Razeghi, M.A. Di Forte-Poisson, K.Y. Cheng, A.Y. Cho J.C. Portal, G. Gregoris, M.A. Brummell, R.J. Nicholas, M. Razeghi, M.A. Di Forte-Poisson, K.Y. Cheng, A.Y. Cho, Two-dimensional magnetophonon resonance in GaInAs-InP and GaInAs-AlInAs heterojunctions and superlattices, Surface Science, Volume 142, Issues 1–3, 1984, Pages 368-374,-- July 1, 1984 ...[Visit Journal] We report the observation of magnetophonon resonance in GaInAs-InP heterojunctions and measurements of the temperature dependence of the oscillations. A single series of oscillations due to scattering by the “GaAs-like” mode of GaInAs is seen, in contrast to GaInAs-InP superlattices, where scattering from InP phonons is also observed, and GaInAs-AlInAs heterojunctions, where coupling to “InAs-like” modes only is seen. This behaviour is discussed in terms of long-range phonon interactions and interface phonons. [reprint (PDF)]
10.	Combined resonant tunneling and rate equation modeling of terahertz quantum cascade lasers Zhichao Chen , Andong Liu, Dong Chang , Sukhdeep Dhillon , Manijeh Razeghi , Feihu Wang Journal of Applied Physics, 135, 115703 ...[Visit Journal] Terahertz (THz) quantum cascade lasers (QCLs) are technologically important laser sources for the THz range but are complex to model. An efficient extended rate equation model is developed here by incorporating the resonant tunneling mechanism from the density matrix formalism, which permits to simulate THz QCLs with thick carrier injection barriers within the semi-classical formalism. A self-consistent solution is obtained by iteratively solving the Schrödinger-Poisson equation with this transport model. Carrier-light coupling is also included to simulate the current behavior arising from stimulated emission. As a quasi-ab initio model, intermediate parameters such as pure dephasing time and optical linewidth are dynamically calculated in the convergence process, and the only fitting parameters are the interface roughness correlation length and height. Good agreement has been achieved by comparing the simulation results of various designs with experiments, and other models such as density matrix Monte Carlo and non-equilibrium Green’s function method that, unlike here, require important computational resources. The accuracy, compatibility, and computational efficiency of our model enables many application scenarios, such as design optimization and quantitative insights into THz QCLs. Finally, the source code of the model is also provided in the supplementary material of this article for readers to repeat the results presented here, investigate and optimize new designs. [reprint (PDF)]
10.	Mid-infrared quantum cascade lasers with high wall plug efficiency Y. Bai, B. Gokden, S. Slivken, S.R. Darvish, S.A. Pour, and M. Razeghi SPIE Proceedings, San Jose, CA Volume 7222-0O-- January 26, 2009 ...[Visit Journal] We demonstrate optimization of continuous wave (cw) operation of 4.6 µm quantum cascade lasers (QCLs). A 19.7 µm by 5 mm, double channel processed device exhibits 33% cw WPE at 80 K. Room temperature cw WPE as high as 12.5% is obtained from a 10.6 µm by 4.8 mm device, epilayer-down bonded on a diamond submount. With the semi-insulating regrowth in a buried ridge geometry, 15% WPE is obtained with 2.8 W total output power in cw mode at room temperature. This accomplishment is achieved by systematically decreasing the parasitic voltage drop, reducing the waveguide loss and improving the thermal management. [reprint (PDF)]
10.	Reliable GaN-based resonant tunneling diodes with reproducible room-temperature negative differential resistance C. Bayram, D.K. Sadana, Z. Vashaei and M. Razeghi SPIE Proceedings, Vol. 8268, p. 826827-- January 22, 2012 ...[Visit Journal] negative differential resistance (NDR). Compared to other negative resistance devices such as (Esaki) tunnel and transferred-electron devices, RTDs operate much faster and at higher temperatures. III-nitride materials, composed of AlGaInN alloys, have wide bandgap, high carrier mobility and thermal stability; making them ideal for high power high frequency RTDs. Moreover, larger conduction band discontinuity promise higher NDR than other materials (such as GaAs) and room-temperature operation. However, earlier efforts on GaN-based RTD structures have failed to achieve a reliable and reproducible NDR. Recently, we have demonstrated for the first time that minimizing dislocation density and eliminating the piezoelectric fields enable reliable and reproducible NDR in GaN-based RTDs even at room temperature. Observation of NDR under both forward and reverse bias as well as at room and low temperatures attribute the NDR behaviour to quantum tunneling. This demonstration marks an important milestone in exploring III-nitride quantum devices, and will pave the way towards fundamental quantum transport studies as well as for high frequency optoelectronic devices such as terahertz emitters based on oscillators and cascading structures. [reprint (PDF)]
10.	High-Power Distributed-Feedback Quantum Cascade Lasers W.W. Bewley, I. Vurgaftman, C.S. Kim, J.R. Meyer, J. Nguyen, A.J. Evans, J.S. Yu, S.R. Darvish, S. Slivken and M. Razeghi SPIE Conference, San Jose, CA, Vol. 6127, pp. 612704-- January 23, 2006 ...[Visit Journal] Recently, a distributed-feedback quantum cascade laser operating in a single spectral mode at 4.8 µm and at temperatures up to 333 K has been reported. In the present work, we provide detailed measurements and modeling of its performance characteristics. The sidemode suppression ratio exceeds 25 dB, and the emission remains robustly single-mode at all currents and temperatures tested. Cw output powers of 99 mW at 298 K and 357 mW at 200 K are obtained at currents well below the thermal rollover point. [reprint (PDF)]
10.	Room temperature continuous wave operation of quantum cascade lasers with 12.5% wall plug efficiency Y. Bai, S. Slivken, S.R. Darvish, and M. Razeghi Applied Physics Letters, Vol. 93, No. 2, p. 021103-1-- July 14, 2008 ...[Visit Journal] An InP based quantum cascade laser heterostructure emitting at 4.6 µm was grown with gas-source molecular beam epitaxy. The wafer was processed into a conventional double-channel ridge waveguide geometry with ridge widths of 19.7 and 10.6 µm without semi-insulating InP regrowth. An uncoated, narrow ridge device with a 4.8 mm cavity length was epilayer down bonded to a diamond submount and exhibits 2.5 W maximum output power with a wall plug efficiency of 12.5% at room temperature in continuous wave operation. [reprint (PDF)]
10.	Microstructural compositional, and optical characterization of GaN grown by metal organic vapor phase epitaxy on ZnO epilayers D.J. Rogers, F. Hosseini Teherani, T. Moudakir, S. Gautier, F. Jomard, M. Molinari, M. Troyon, D. McGrouther, J.N. Chapman, M. Razeghi and A. Ougazzaden Journal of Vacuum Science and Technology B, Vol. 27, No. 3, May/June, p. 1655-1657-- May 29, 2009 ...[Visit Journal] This article presents the results of microstructural, compositional, and optical characterization of GaN films grown on ZnO buffered c-sapphire substrates. Transmission electron microscopy showed epitaxy between the GaN and the ZnO, no degradation of the ZnO buffer layer, and no evidence of any interfacial compounds. Secondary ion mass spectroscopy revealed negligible Zn signal in the GaN layer away from the GaN/ZnO interface. After chemical removal of the ZnO, room temperature (RT) cathodoluminescence spectra had a single main peak centered at ~ 368 nm (~3.37 eV), which was indexed as near-band-edge (NBE) emission from the GaN layer. There was no evidence of the ZnO NBE peak, centered at ~379 nm (~3.28 eV), which had been observed in RT photoluminescence spectra prior to removal of the ZnO. [reprint (PDF)]
10.	Monolithic integrated photoreceiver for 1.3–1.55‐μm wavelengths: Association of a Schottky photodiode and a field‐effect transistor on GaInP‐GaInAs heteroepitaxy A. Hosseini Therani; D. Decoster; J. P. Vilcot; M. Razeghi J. Appl. Phys. 64, 2215–2218 (1988) -- March 24, 1988 ...[Visit Journal] We present a monolithic integrated circuit associating a Schottky photodiode and a field-effect transistor which has been fabricated, for the first time, on G8.0.49 InO.51 P /GaO,47 Ino.53 As strained heteroepitaxiaI material. Static, dynamic, and noise properties of the Schottky photodiode, the field-effect transistor, and the integrated circuit have been investigated and are reported. As an example, dynamic responsivity up to 50 A/W can be achieved at 1.3-pm wavelength for the integrated photoreceiver. The performance of the device is discussed, taking into account the integrated circuit design and the main characteristics of the material. [reprint (PDF)]
10.	Kinetics of photoconductivity in n-type GaN photodetector P. Kung, X. Zhang, D. Walker, A. Saxler, J. Piotrowski, A. Rogalski, and M. Razeghi Applied Physics Letters 67 (25)-- December 18, 1995 ...[Visit Journal] High-quality ultraviolet photoconductive detectors have been fabricated using GaN layers grown by low-pressure metalorganic chemical vapor deposition on (11⋅0) sapphire substrates. The spectral responsivity remained nearly constant for wavelengths from 200 to 365 nm and dropped sharply by almost three orders of magnitude for wavelengths longer than 365 nm. The kinetics of the photoconductivity have been studied by the measurements of the frequency‐dependent photoresponse and photoconductivity decay. Strongly sublinear response and excitation‐dependent response time have been observed even at relatively low excitation levels. This can be attributed to redistribution of the charge carriers with increased excitation level. [reprint (PDF)]
10.	Delta-doping optimization for high qualityp-type GaN C. Bayram, J.L. Pau, R. McClintock and M. Razeghi Journal of Applied Physics, Vol. 104, No. 8-- October 15, 2008 ...[Visit Journal] Delta-doping is studied in order to achieve high quality p-type GaN. Atomic force microscopy, x-ray diffraction, photoluminescence, and Hall measurements are performed on the samples to optimize the delta-doping characteristics. The effect of annealing on the electrical, optical, and structural quality is also investigated for different delta-doping parameters. Optimized pulsing conditions result in layers with hole concentrations near 10¹⁸ cm⁻³ and superior crystal quality compared to conventional p-GaN. This material improvement is achieved thanks to the reduction in the Mg activation energy and self-compensation effects in delta-doped p-GaN. [reprint (PDF)]
10.	Growth and characterization of InP using metalorganic chemical vapor deposition at reduced pressure M. Razeghi, J.P. Duchemin M. Razeghi, J.P. Duchemin, Growth and characterization of InP using metalorganic chemical vapor deposition at reduced pressure, Journal of Crystal Growth, Volume 64, Issue 1, 1983, Pages 76-82,-- November 1, 1983 ...[Visit Journal] M. Razeghi, J.P. Duchemin, Growth and characterization of InP using metalorganic chemical vapor deposition at reduced pressure, Journal of Crystal Growth, Volume 64, Issue 1, 1983, Pages 76-82, [reprint (PDF)]
10.	Comparison of Gain and Threshold Current Density for InGaAsP/GaAs λ = 808 nm) Lasers with Different Quantum-Well Thickness H.J. Yi, J. Diaz, I. Eliashevich, G. Lukas, S. Kim, D. Wu, M. Erdtmann, C. Jelen, S. Slivken, L.J. Wang, and M. Razeghi Journal of Applied Physics 79 (11)-- July 1, 1996 ...[Visit Journal] We investigated the quantum‐size effects of quantum well (QW) on gain and threshold current density for InGaAsP/GaAs (λ=808 nm) laser diodes. In this work, a comparison is made of lasers with different QW thickness while keeping the optical confinement factors constant. We found that the threshold current density and differential efficiency were not affected by narrowing the QW thickness. The theoretical model taking into account the mixing of the valence bands and momentum relaxation for InGaAsP/GaAs lasers with spontaneous emission (optically pumped) measurement shows that the absence of difference between these structures can be attributed to the high relaxation rate. [reprint (PDF)]
10.	High-speed, low-noise metal-semiconductor-metal ultraviolet photodetectors based on GaN D. Walker, E. Monroy, P. Kung, J. Wu, M. Hamilton, F.J. Sanchez, J. Diaz, and M. Razeghi Applied Physics Letters 74 (5)-- February 1, 1999 ...[Visit Journal] We present the fabrication and characterization of nonintentionally doped GaN and GaN:Mg Schottky metal–semiconductor–metal (MSM) photodetectors, grown on sapphire by metalorganic chemical vapor deposition. Low-leakage, Schottky contacts were made with Pt/Au. The devices are visible blind, with an ultraviolet/green contrast of about five orders of magnitude. The response times of the MSM devices were <10 ns and about 200 ns for GaN and GaN:Mg, respectively. The noise power spectral density remains below the background level of the system (10−24 A²/Hz) up to 5 V, for the undoped GaN MSM detector. [reprint (PDF)]
10.	Surface plasmon enhanced light emission from AlGaN-based ultraviolet light-emitting diodes grown on Si (111) Chu-Young Cho, Yinjun Zhang, Erdem Cicek, Benjamin Rahnema, Yanbo Bai, Ryan McClintock, and Manijeh Razeghi Appl. Phys. Lett. 102, 211110 (2013)-- May 31, 2013 ...[Visit Journal] We report on the development of surface plasmon (SP) enhanced AlGaN-based multiple quantum wells (MQWs) ultraviolet (UV) light-emitting diodes (LEDs) grown on silicon (111) substrates. In order to generate SP-coupling with the radiating dipoles in MQWs, an aluminum layer is selectively deposited in holes etched in the top p-AlGaN to p-GaN layers. After flip-chip bonding and substrate removal, an optical output power of ∼1.2 mW is achieved at an emission wavelength of 346 nm; the output power of these UV LEDs with Al layer is increased by 45% compared to that of conventional UV LEDs without Al layer. This enhancement can be attributed to an increase in the spontaneous emission rate and improved internal quantum efficiency via resonance coupling between excitons in MQWs and SPs in the aluminum layer. [reprint (PDF)]
10.	Recent advances in high power mid- and far-wavelength infrared lasers for free space communication S. Slivken and M. Razeghi SPIE Optics East Conference, October 1-4, 2006, Boston, MA Proceedings – Active and Passive Optical Components for Communications VI, Vol. 6389, p. 63890S-1-- October 4, 2006 ...[Visit Journal] Link reliability is a significant issue for free space optical links. Inclement weather, such as fog, can seriously reduce the transmission of light through the atmosphere. However, this effect, for some types of fog, is wavelength-dependent. In order to improve link availability in both metro and hostile environments, mid- and far-wavelength infrared diode lasers can be of use. This paper will discuss some of the recent advances in high-power, uncooled quantum cascade lasers and their potential for use in long range and/or highly reliable free space communication links. [reprint (PDF)]
10.	World's first demonstration of type-II superlattice dual band 640 x 512 LWIR focal plane array E.K. Huang and M. Razeghi SPIE Proceedings, Vol. 8268, p. 82680Z-- January 22, 2012 ...[Visit Journal] High resolution multi-band infrared detection of terrestrial objects is useful in applications such as long range and high altitude surveillance. In this paper, we present a 640 x 512 type-II superlattice focal plane array (FPA) in the long-wave infrared (LWIR) suitable for such purposes, featuring 100% cutoff wavelengths at 9.5 μm (blue channel) and 13 μm (red). The dual band camera is single-bump hybridized to an Indigo 30 μm pitch ISC0905 read-out integrated circuit. Test pixels revealed background limited behavior with specific detectivities as high as ~5x10¹¹ Jones at 7.9 μm (blue) and ~1x10¹¹ Jones at 10.2 μm (red) at 77K. [reprint (PDF)]
10.	Photoluminescence Study of AlGaN-based 280 nm Ultraviolet Light-Emitting Diodes A. Yasan, R. McClintock, K. Mayes, D.H. Kim, P. Kung, and M. Razeghi Applied Physics Letters, 83 (20)-- November 17, 2003 ...[Visit Journal] We investigated optical properties of single quantum well AlGaN-based UV 280 nm light-emitting diodes using temperature-dependent photoluminescence (PL) measurement. We found an "S-shaped" temperature dependence of the peak energy. From the Arrhenius plot of integrated PL intensity, we speculate that dislocations as well as thermal emission of carriers out of the quantum well are responsible for the PL quenching behavior. Also a second nonradiative channel with much lower activation energy was found, the origin of which we believe to be quenching of the bound excitons [reprint (PDF)]
10.	Ultra-broadband quantum cascade laser, tunable over 760 cm−1, with balanced gain N. Bandyopadhyay, M. Chen, S. Sengupta, S. Slivken, and M. Razeghi Opt. Express 23, 21159-21164 -- August 10, 2015 ...[Visit Journal] A heterogeneous quantum cascade laser, consisting of multiple stacks of discrete wavelength quantum cascade stages, emitting in 5.9-10.9 µm, wavelength range is reported. The broadband characteristics are demonstrated with a distributed-feedback laser array, emitting at fixed frequencies at room temperature, covering an emission range of ~760 cm⁻¹, which is ~59% relative to the center frequency. By appropriate choice of a strained AlInAs/GaInAs material system, quantum cascade stage design and spatial arrangement of stages, the distributed-feedback array has been engineered to exhibit a flat threshold current density across the demonstrated range. [reprint (PDF)]
10.	Radiative recombination of confined electrons at the MgZnO/ ZnO heterojunction interface Sumin Choi, David J. Rogers, Eric V. Sandana, Philippe Bove, Ferechteh H. Teherani, Christian Nenstiel, Axel Hoffmann, Ryan McClintock, Manijeh Razeghi, David Look, Angus Gentle, Matthew R. Phillips & Cuong Ton-That Nature Scientific Reports 7, pp. 7457-- August 7, 2017 ...[Visit Journal] We investigate the optical signature of the interface in a single MgZnO/ZnO heterojunction, which exhibits two orders of magnitude lower resistivity and 10 times higher electron mobility compared with the MgZnO/Al₂O₃ film grown under the same conditions. These impressive transport properties are attributed to increased mobility of electrons at the MgZnO/ZnO heterojunction interface. Depthresolved cathodoluminescence and photoluminescence studies reveal a 3.2 eV H-band optical emission from the heterointerface, which exhibits excitonic properties and a localization energy of 19.6 meV. The emission is attributed to band-bending due to the polarization discontinuity at the interface, which leads to formation of a triangular quantum well and localized excitons by electrostatic coupling. [reprint (PDF)]
10.	Demonstration of type-II superlattice MWIR minority carrier unipolar imager for high operation temperature application Guanxi Chen, Abbas Haddadi, Anh-Minh Hoang, Romain Chevallier, and Manijeh Razeghi Optics Letters Vol. 40, Iss. 1, pp. 29–32-- December 18, 2014 ...[Visit Journal] An InAs/GaSb type-II superlattice-based mid-wavelength infrared (MWIR) 320×256 unipolar focal plane array (FPA) using pMp architecture exhibited excellent infrared image from 81 to 150 K and ∼98% operability, which illustrated the possibility for high operation temperature application. At 150 K and −50 mV operation bias, the 27 μm pixels exhibited dark current density to be 1.2×10⁻⁵ A/cm², with 50% cutoff wavelength of 4.9 μm, quantum efficiency of 67% at peak responsivity (4.6 μm), and specific detectivity of 1.2×10¹² Jones. At 90 K and below, the 27 μm pixels exhibited system limited dark current density, which is below 1×10⁻⁹ A/cm², and specific detectivity of 1.5×10¹⁴ Jones. From 81 to 100 K, the FPA showed ∼11 mK NEDT by using F/2.3 optics and a 9.69 ms integration time. [reprint (PDF)]
10.	Characterization of InTlSb/InSb Grown by Low Pressure Metalorganic Chemical Vapor Deposition on GaAs Substrat Y.H. Choi, P. Staveteig, E. Bigan, and M. Razeghi Journal of Applied Physics 75 (6)-- March 15, 1994 ...[Visit Journal] Optical properties of InTlSb, a new long wavelength infrared material, are investigated. InTlSb/InSb epilayers grown by low‐pressure metal‐organic chemical vapor deposition on semi‐insulating GaAs substrates were characterized using Auger electron spectroscopy and Fourier transform infrared spectroscopy. Auger electron spectra confirm the presence of thallium. Transmission measurements at 77 K indicate an absorption shift from 5.5 μm for InSb up to 8 μm for InTlSb that is confirmed by photoconductivity measurements. [reprint (PDF)]
10.	Recent progress of widely tunable, CW THz sources based QCLs at room temperature Manijeh Razeghi Terahertz Science and Technology, Vol.10, No.4, pp. 87-151-- December 7, 2017 ...[Visit Journal] The THz spectral region is of significant interest to the scientific community, but is one of the hardest regions to access with conventional technology. A wide range of compelling new applications are initiating a new revolution in THz technology, especially with regard to the development of compact and versatile devices for THz emission and detection. In this article, recent advances with regard to III-V semiconductor optoelectronics are explored with emphasis on how these advances will lead to the next generation of THz component technology [reprint (PDF)]
10.	Crystallography of epitaxial growth of wurtzite-type thin films on sapphire substrates P. Kung, C.J. Sun, A. Saxler, H. Ohsato, and M. Razeghi Journal of Applied Physics 75 (9)-- May 1, 1994 ...[Visit Journal] In this article, we present a crystallographic model to describe the epitaxial growth of wurtzite‐type thin films such as gallium nitride (GaN) on different orientations of sapphire (Al2O3) substrates. Through this model, we demonstrate the thin films grown on (00⋅1)Al₂O₃ have a better epilayer‐substrate interface quality than those grown on (01⋅2)Al₂O₃. We also show the epilayer grown on (00⋅1)Al₂O₃ are gallium‐terminated, and both (00⋅1) and (01⋅2) surfaces of sapphire crystals are oxygen‐terminated. [reprint (PDF)]
10.	High differential resistance type-II InAs/GaSb superlattice photodiodes for the long-wavelength infrared A. Hood, D. Hoffman, B.M. Nguyen, P.Y. Delaunay, E. Michel and M. Razeghi Applied Physics Letters, 89 (9)-- August 28, 2006 ...[Visit Journal] Type-II InAs/GaSb superlattice photodiodes with a 50% cutoff wavelength ranging from 11 to 13 μm are presented. Optimization of diffusion limited photodiodes provided superlattice structures for improved injection efficiency in direct injection hybrid focal plane array applications. [reprint (PDF)]

Page 21 of 30: Prev << 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 >> Next (732 Items)